Snake Door Handle
by snot_nose, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Door handle fitting with a hole of 8.8mm on 8.9 mm
Including support inside the hole.
Could be also printed without the support if its printed in the Z axis (needs to be rotated) but then it would be less strong regarding the force coming from the hand
I added also the blend file, so you can adjust the hole size to fit for your needs, using the low poly version of the mesh.
The sculpture is applied on top of it using multires modifier
the support can be adjusted using the array modifier
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Snake Door Handle by snot_nose is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving snot_nose a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure snot_nose would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).