Case for FilaMaker Mini shredder
by neovs, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Not my design but it was on this adress :
Now it's gone so I think some of you might want it.
I included the gear cover by EddyMI3D taken from here :
you can get your mini shredder here :
This is housing for the FilaMaker mini shredder KIT.
Use minimum of 65% infill for the part 3d1. ABS or PLA. Mine is printed in PLA at 75% infill
For other parts is 30% infill OK. I used 40%
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Case for FilaMaker Mini shredder by neovs is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving neovs a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure neovs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).