Compact Bowden Extruder, 1.75mm Filament for MK7 Drive Gear
by Tech2C, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This Bowden extruder kit is simple and effective. Flawless usage so far. Many thanks to schlotzz for his elegant design.
Printed ABS at 0.2mm with 30% infill.
Edited the openscad file dimensions for the larger MK7 drive gear.
2 x M3 x 25mm screws with washers and nuts
2 x M3 x 10mm screws with washers and nuts
2 x M3 x 15mm screws with nuts
1 x M5 x 10mm screw
1 x 608 bearing
1 x MK7 drive gear
1 x PTFE push fit connector
Approx 500-700mm of PTFE / Teflon tube
Small spring for adjustable tension on idler.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Compact Bowden Extruder, 1.75mm Filament for MK7 Drive Gear by Tech2C is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Tech2C a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Tech2C would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).