Grave Stone 003
by RedOrder, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a Grave stone in H0 scale
The file is in STL.
The Grave stone is made in Google Sketchup.
The Grave stone is then fixed in Model Repair Service.
with 3mm PLA I have used 875 mm. it takes about 33 minutes to print with the Wellmann K8100.
It is a 1 pieces kit Depending on speed of your print you might need to cool down the printed materials, as shown on the picture, the top has bented a bit downwards.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Grave Stone 003 by RedOrder is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving RedOrder a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure RedOrder would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).