Front Knuckle Spacers for Kyosho Mini-Z MR-02/MR-03
by 3dprintingblog, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A set of spacers for the front knuckles of the Kyosho Mini-Z MR-02 and MR-03 RC models. These are used for regulating the height of the front suspension as well as limiting the maximum travel of the car's wheels. We have the spacers available in three different sizes in order to help you get finer tuning ability, so here are spacers height 0.5 mm, 1 mm and 1.5 mm. You can also combine multiple spacers to get the desired height adjustment. Make sure you use finer resolution for printing these out as they are quite small and need to be precise, we have used 0.1 mm layer height for a great result. Also you might need to lower the extrusion speed a bit while 3D printing the part for best results.
Designed by http://minirc-project.com/
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Front Knuckle Spacers for Kyosho Mini-Z MR-02/MR-03 by 3dprintingblog is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving 3dprintingblog a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3dprintingblog would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).