Front Body Holder Spacer for Kyosho Mini-Z
by 3dprintingblog, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
An easy and useful way of adjusting the height of the body at the front of your Kyosho Mini-Z RC model is to control the position of the front body mount. By adding a spacer under the front body mount you can lower the front of the car's body to make it more aerodynamic and stable on the track. So we have designed an easy to use spacers to go under the front body mount to help you adjust the body height at the front of the card in a more easy and straightforward way without having to rely on shims. The 3D printable front body holder spacers are available in two different heights, to make it easy for you to adjust the height more precisely - 0.5 mm and 1 mm. Make sure you 3D print them using finer layer height such as 0.1 mm for best results.
Designed by http://minirc-project.com/
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Front Body Holder Spacer for Kyosho Mini-Z by 3dprintingblog is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving 3dprintingblog a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3dprintingblog would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).