Raspberry Pi 2 Case with Windows 10 Logo
by TheMakersWorkbench, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
When Microsoft announced that Windows 10 would be arriving on the Raspberry Pi 2 in 2015 I became extremely excited at the possibilities that this would bring the maker community. To celebrate I wanted to design a case for the Pi 2 that incorporated the Windows 10 logo.
I decided to search Thingiverse before starting my design to see if anyone had beaten me to the punch as there is no reason to spend hours reinventing the wheel. To my delight, Thingiverse user jayftee had just released a new version of his Safe and Secure Raspberry Pi case. The Safe and Secure Raspberry Pi 2B Case included several different designs of which one incorporated the Windows logo.
This was perfect, except that it did not include any cutouts for easy GPIO access, or any provisions for ribbon-cabled accessories such as the Pi Camera. Luckily for me jayftee was kind enough to include the Sketchup .skp file in the thing's files. (Something everyone should do I might add) This allowed me to edit the case to fit my needs.
I added a cut out for the GPIO pins, and two slots for ribbon cable accessories. These are not extruded all the way through and a thin .5mm layer will need to be cut away for use. I did this because not everyone will need these slots, and those who do, can simply use an Exacto knife to remove the thin plastic.
I have also included my modified .skp files in the event someone needs to modify this design further.
Print per your normal printing setup. I used .20 layer height, with an average printing speed of 70mm/sec.
Use Blue Hawk 4-40 machine screws no longer than 22mm in length.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Raspberry Pi 2 Case with Windows 10 Logo by TheMakersWorkbench is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TheMakersWorkbench a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TheMakersWorkbench would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).