by dgo, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This Jewerly Hand I've made from http://www.thingiverse.com/thing:1286 with some small modifications. I've remove second hand from STL file,reduse some surfaces, which doesn't really corresponds human hands (acute angles etc.) and increase 2 times.
The Hand is now about 16 cm high.
I've made this thing from HIPS with 0,2 mm nozzle.
Attention, the print time cat be about 9-10 hours!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Jewelry Hand by dgo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dgo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dgo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).