A compact case for a Pi 2 or Pi B+ with the Adafruit 2.8" PiTFT resistive touch screen.
The case includes access for all cables and ports, including routing the camera cable out any of 3 sides.
Print both halves. (the upper half needs to be flipped before slicing)
Attach the PiTFT board to the upper half using standard computer screws (such as used for mounting harddrives).
Attach the Pi B+ board to the bottom using similar screws.
Align the board connectors and snap the two halves together. It is easiest to close the end opposite the USB ports first and work your way toward the USB/Ethernet ports.