Filament Guide for Tower Center - Prusa i3 8mm Acrylic
by kafarn, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Made a filament guide in SketchUp for the top center of my GEEETech Prusa i3 Acrylic - this guide slips over the acrylic plate (8mm) and fits the factory holes (drilled for mounting the LCD on top of the tower).
Created in Sketchup
Mesh repair with netfabb
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament Guide for Tower Center - Prusa i3 8mm Acrylic by kafarn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving kafarn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure kafarn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).