72mm exhaust fan for 3d printer to 3" hose
by BloomingtonFPV, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
exhaust your ABS fumes outside with this 3" hose adaptor. The fan goes on the outside of your case and connects to the hose with a ziptie. The other end will ziptie to a 90 degree connector on a 2" PVC connector for venting outside.
72mm fans are often found on power supplies for computers. Make sure to avoid the capacitors if you take a power supply apart! They can hold a charge for a very long time and can be very dangerous!
print at .2mm no support 15% infil
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
72mm exhaust fan for 3d printer to 3" hose by BloomingtonFPV is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving BloomingtonFPV a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure BloomingtonFPV would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).