Meade 14 mm UWA Telescope Eyepiece Case
by the_digital_dentist, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A screw-top case for the formidable Meade 14 mm UWA 1.25" telescope eyepiece. The eyepiece will fit with the rubber eye guard extended or collapsed. The case is intended for use with lens caps in place.
Designed using DesignSpark Mechanical as my first-ever test of printed threads. The threads were designed to print without support material.
No brim, no raft, no support needed. Just load up your favorite ABS and print. I used Coex3D ABS, printed on Son of MegaMax (SoM), my recently rebuilt printer, in 320 um layers at 40mm/sec. It took about 12 hours.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Meade 14 mm UWA Telescope Eyepiece Case by the_digital_dentist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving the_digital_dentist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure the_digital_dentist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).