by Daesgrith, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I needed something that looked like a sci-fi shield for a cosplay and decided to take some inspiration from Fox's reflector.
It is modeled after images from Super Smash Brothers for Wii-U by an industrial design student named Trisk.
The light in the middle prints separately so it's easier to use a different colour filament or paint.
I printed it at 0.1mm layer height 15% infill with black PLA on a Velleman K8200. Took about 5 hours. The light in the middle prints separately so it's easier to paint or print in a different colour.
Painted with acrylic paint, but rather in a hurry and without previous experience, so there might be better methods.
The leather strap used to attach it to my belt was made by hand by a friend using fake leather.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Starfox Reflector by Daesgrith is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Daesgrith a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Daesgrith would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).