Filament Cleaner & Clip 1.75mm
by trev502000, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A simple device designed to be left on the filament reel that has an inbuilt filament cleaner and clips onto the reel when you are finished with it to stop it getting tangled
there is an opening inside to shove a small piece of sponge for the filament cleaner and a drop of oil if you wish if the clip is to loose or to tight for the reel warm with a heat source and adjust printed with no supports at 0.2mm at 60mm/sec on a I3 Hephestos from http://www.3dprintworld-aylesbury.co.uk
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament Cleaner & Clip 1.75mm by trev502000 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving trev502000 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure trev502000 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).