I designed a mount for the E3D V6lite hot end, that will allow it to mount to the stock direct drive extruder that ships with the Folgertech Prusa i3 kit.
Includes a remixed cap that originally came from
Will also work with the following modified tensioned extruder housing.
2 m3 x 25mm screws
2 m3 x 16mm screws
2 m3 nuts
4 m3 washers
5/8/15 - Added some instructions.
Print both pieces of the part, there is no need for any support material. I printed them for at .20mm and 40% infill and they are plenty strong enough.
You WILL need to trim the PTFE liner flush with the black collar on the top of the V6 Lite6 hotend.