This motor is like the others but I had added a extra Drum this is for the self contain generator.This is what inspired me https://www.youtube.com/watch?v=sAIG0-lNSEs The coils for the generator came from a pancake motor from out of a ceiling fan. Woks well for the job. I added a bridge rectifier and a 12 volt reg. and hooked to a DC to AC riveter for my regulated 110 ~ 120 VAC. out. This is still a work in progress I have been working on researching and gathering all the info from different sources for the last three years. Not to mention learning to create things in the 3d world. Oh by the way the program I used that I created my parts with is very similar to Solid Works, Please take a look at this 9 min. video https://www.youtube.com/watch?v=ZXgMY3-hlgs But this is FREE it's name is Design Spark Mechanical http://www.rs-online.com/designspark/electronics/eng/page/mechanical .I started out with Blender for about a year but when I came across DSM I was blown away. What I had learned in blender for the year or so, I had
learned in 3 ~ 4 hours in DSM I highly recommend it. Please if you have any questions or input, my E-Mail [email protected] :)
More from DIY
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving kb3lnn a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.