Releasing my design "Sigma3D Printer" for hobbyists to build it for "PERSONAL USE ONLY!". My first Sigma3D printer is now 3 years old and can print 7/24. This stable version includes all latest modifications.
Most of the parts can be printed both PLA or ABS with infill of minimum %25. X carriage and hotend fan ducts must be printed ABS or PowerABS. You may find revisions made for this thing at the bottom of the page. Please note that you may make shorter versions by shortening vertical metal parts by equal amounts.
I hope you enjoy Sigma3D.
Türk ziyaretçilere not: Kaynak dosyalar, ticari olmayan bireysel kullanım için açılmıştır, yapılıp satılması ve "Sigma3D" kelimesinin ticari işlerde izinsiz kullanılması yasaktır, Buradaki lisans Türkiye'de de yasal olarak geçerlidir.
for assembly instructions please visit:
Print Area: 200x200x230 mm
Part List: ATTACHED AS PDF
THING REVISION HISTORY:
11.05.2015-DLE_T renamed to IDLE_T
13.05.2015-single STL of full printer model has been added
13.05.2015-Lcd box option for full graphic has been added
14.05.2015-Plate drawing has been changed with mm version.
19.05.2015-Latest Firmware has been added
19.05.2015-OZOFLEX.STL has been added
20.05.2015-comment has been added for ramps box part.
22.05.2015-1_SET_ROD_HOLDER has been added
29.05.2015- 685 bearing has been added as option
29.05.2015-pingo foot name extended with "rubber"
29.05.2015-"meter" unit has been added for belts
23.06.2015-Optional Fan Duct has been added.
24.08.2015-extruder gears replaced with my spurgear design.
24.08.2015-fan duct 1c cancelled, no longer needed.
24.08.2015-z_inner_608guide.stl has been added for optional use.
21.09.2015-PDF BOM added with where used descriptions
27.11.2015-Z-Coupling deleted, no longer used, use Alu-5x8 flexible instead.
07.05.2017- 20x20 fan connecting adapters added.
09.06.2017- New Z elevators added for T8 Lead Screws
09.06.2017-New airduct added fits new Sigma3D hotend
06.07.2017- Left Z elevator part had been replaced by stronger one.