Loading
propm

Test cube

by propm May 11, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Repetier Host 1.0.6 says the .stl is not manifold. Not sure what that means, but it appears to be either a warning or an error.

I am sorry to hear that, I will make sure to see if it is something I can do to fix this problem. But I am not sure if the model is the problem, I have used it in both Cura and I thinks its Repetier, but I cant remember because I only use Cura now. Any way, I will take a look at it, thank you for telling me :) And if you should manage to get it to work somehow, please make sure to notify me :)

I printed this with some changed settings on my new printer to see if it would cause the ABS to warp. Thanks.

Thanks your self :) And what where the results? little, much or no warping? I also tested whit ABS, and my cube lifted slightly in the corners.

Thanks your self :) And what where the results? little, much or no warping? I also tested whit ABS, and my cube lifted slightly in the corners.

Anyone had any use for my test cube? tested it? Because surprisingly I see over 30 downloads but no one has said that they accely made one. anyhow, for you that might have printed it, what do you think? :) its simple, yet sort of complicated. if you can print this out in 0.15 scale and the small outward text is visible, well then I Am very impressed by your printer ;)