We needed a fan mount and duct for our x-carriage that was short enough to accomodate for our j-head.
We are proud to present to you "The elephant"!
Print all three parts and assemble the structure.
For this you will need the following:
- 1x 40mm fan (12V)
- 4x M3x20 screws
- 4x M3x16 screws (or alternative another 4x M3x20) - for mounting the fan
- 1x M3x30 screw
- 8x M3 washers
- 9x M3 nuts
Printed on PLA/PHA 2.85mm Colorfabb Signal Yellow, with a 0.5mm nozzle, layer height 0.3, on a Prusa i3.