Worms! Fridge Magnet
by FreedomFridge, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Let the world know that you refrigerator has not been contacted by the government.
This file is licensed under the BipCot NoGov Media license (http://bipcot.org)
BipCot NoGov Media License (www.bipcot.org), version 1 / No warranty of usability of “Worms Fridge Magnet".
This original media was made by license holder James Babb / FreedomFridge, 2015. All rights to make fun of you reserved.
Redistribution and use in any form, with or without modification, are permitted provided that the following conditions are met:
Redistributions in unaltered form must retain the entirety of this license.
Redistributions in altered form must reproduce the entirety of this license.
Neither the name of the license holder nor the names of its contributors may be used to endorse or promote products derived from this media without specific prior written permission.
Governments, and agents and subcontractors of same, are not permitted to use this media or derivations of this media.
If governments, agents and subcontractors of same use this media, or derivations of this media, all agencies and persons directly and knowingly involved may be shamed in public, by name, on the Internet, on radio, and in any media now extant or invented in the future, throughout the known universe and elsewhere, in perpetuity. Governments, agents and subcontractors of same that use this media, or derivations of this media, agree to endure this shaming, without comment or action.
Any person or entity that violates any part of this agreement will also be shamed as above, and agrees to endure this shaming, without comment or action.
- The BipCot NoGov Media License adapts the first 3 clauses of the 3-Clause BSD license (Berkeley Software Distribution license) and adapts the BSD "as is" text at the end. The 3-Clause BSD license is in the Public Domain. However, there is no partnership or endorsement created or implied between the creators or users of The BipCot NoGov Media License and the creators or users of the BSD license, or vise versa.
THIS MEDIA IS PROVIDED BY THE LICENSE HOLDER AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE LICENSE HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS MEDIA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This can be printed in three layers.
Print up to 4 mm, then add two 1/2" x 1/8" neodymium magnets (http://www.amazon.com/gp/product/B00CNZ1LTE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1).
Print 4-5 mm, then change filament colors and print the remaining layer (5+ mm).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Worms! Fridge Magnet by FreedomFridge is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FreedomFridge a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FreedomFridge would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).