A small box to hold all the tools you would need in a basic, or advance field-repair. Mount it on you belt.
You'll need to glue the "Belt_clip" to the back. The lock is mounted with a screw. The hole in the lock is a little bigger than the hole in the bottom,
The "Tool_Mount" and the "Tool_Holder" parts, needs to be scaled to the individual tool, and then glued into the wished position. The diameter on the holes are 5 mm.
I would not recommend using hot glue. Its too weak, and takes up space. Use something like Contact-glue, or superglue. Just be careful! Do this at your own risk! Are you underage, get an adult to help.