Thule Fairing Spacer
by jastle, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I made this spacer because the sunroof on my car would get hung-up when trying to close on the little feet at the bottom of the fairing mount. The spacer fits perfectly into the open space on the underside of each fairing mount. The slope on the spacer causes the sunroof to push the fairing up and out of the way so it can close.
I have a Jetta Sportwagen with the panoramic sunroof. Because the sunroof size extends further forward then most cars the fairing ends up being positioned ontop of the sunroof when mounted. This spacer allows for you to have the fairing on the car and still close the sunroof without any binding.
1.) Print out 4 of these.
2.) If in direct sunlight coat with a UV resistant paint
3.) Enjoy the fresh air :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Thule Fairing Spacer by jastle is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jastle a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jastle would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).