Mendel90 40mm Fanduct
by sivar2311, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
40mm Fanduct for Mendel90.
- No Support needed
- Layerheight: 0.2mm
- Extrusion width: 0.5mm
- Perimeters: 3
- Infill: 20%
- 1x M3x15 Screw
- 2x M3x Screws (length dependeing the depth of your 40mm Fan)
- 3x M3 nut
- 1 40mm Fan
- Remove the old fanduct
- Install the new one
- Be happy with the reduced weight of your x-carriage
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mendel90 40mm Fanduct by sivar2311 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sivar2311 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sivar2311 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).