16 pins socket
by happynew3d, published
Use This Project
Give a Shout Out
This socket is suitable for connect a 16 pin photomultiplier M12FS35. This tube doesn't heat up as it is cold cathode. The contacts are inspired by http://www.thingiverse.com/thing:77271 Molex 08-50-0106. After connecting the wire to the contact position place it in the housing with help of a hot solder iron and a screw driver in the main hole. This way the contact slide down and is fixed in place.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
16 pins socket by happynew3d is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving happynew3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure happynew3d would love to see what you've printed. Please document your print and share a Make with the community.