This mod reuses all the stock parts and is fully reversible. The extruder motor is moved/mounted to the frame and the stock carriage is used to mount the E3D v6 hotend. You'll need to add the appropriate lengths M3 screws, nuts and one quick disconnect coupler. I will try and document the install process, but feel free ask me any questions in the mean time.
You can see the mod in action here: https://www.youtube.com/watch?v=dpZDC1HZqIw
Mount Quick E3D Bowden Extruder Mount---D.STL on top of frame with extruder motor on the bottom side. Reuse the stock idler arm and spring.
- Mount E3D v6 hotend using:
Quick E3D Bowden Mount---REVA.STL and
Quick E3D Bowden Mount-B---REVA.STL
2b. Slide Quick E3D Shroud.STL into the 2nd slot from the bottom of the heatsink. This shroud will block the airflow from the cooling fan from cooling down the heater block. Without it your hotend will never get up to temperature.
- Mount stock fan to Quick E3D Bowden Mount-B---REVA.STL
NOTE: Insert the 2 M3 screws through the back of this part prior to mounting it to the hotend.