by snkovacs, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
For my first MakerBot project I made a white flower.
I used Inventor for this project. To create the design I made a circle with a diameter of 0.25 in. in the center of the plane. Then I created an ellipse touching the top of the circle. I used the circular pattern tool to create the rest of the petals. Next, I extruded the flower and saved the file as a .ipt and .stl. I saved the STL file to my flash drive and plugged it into the computer for the Thing-O-Matic. While the software generated the G Code, I changed the color of the plastic to white and heated up the platform and extruder. The print took about 25 minutes.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
MakerBot Flower by snkovacs is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving snkovacs a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure snkovacs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).