by TheSeend, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A little jigsaw puzzle in a cube shape.
You will need 8 pieces to complete this cube.
The default settings of Cura 13.03.
Exceptions Basic - Quality:
- Layer Height (mm) = 0.1
- Wall thickness (mm) = 0,6
- Enable retraction = thrue
Exceptions Basic - Fill:
- Fill Density (%) = 25
Exception Basic - Support structure
- Support type = Everywhere
Exceptions Expert config - Infill:
- Infill pattern = Grid Hexagonal
- Infill overlap (%) = 50
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Jigsaw Cube by TheSeend is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TheSeend a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TheSeend would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).