Mini Bartop Arcade made of MDF using raspberry pi.
Everything can be cut from a 4x4 sheet of 1/2 plywood. I used MDF but if you don't you might have to adjust the width of the mortises.
I used a 1/4" straight bit to cut everything except the screw holes.
The mortises are pocket cut .25" deep. Screw holes are drilled with 1/8" bit.
The screw holes are so the machine can be assembled and disassembled easily. You could easily glue permanently but I figured I would have to take it apart a few times to get the controls working properly.
The button holes are for standard 1 1/8" buttons. The opening for the monitor might need adjust depending on what monitor you use.
I used http://www.microcenter.com/product/443396/P1914S_19_(Factory-Recertified)_IPS_LED_Monitor
More from Toy & Game Accessories
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving mattsplat a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.