Hasselblad 500 EL/M Battery Door Lock-Screw with Handle
by fluetke, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a custom made handle/battery-door lock for the Hasselblad 500 EL/M, which does not require a coin or screwdriver to open.
Update: Added new version of knop with slightly bigger hole to improve fit.
Prints perfect on Ultimaker with 25mm/s print speed and additional cooling during the last, smallest part.
Printed the parts using PLA with a layer height of 0.2mm.
The holes in this design are the tricky part, you'll most likely have to redrill them after printing. If you can't print it with the hole in the smaller cylinder, use the provided _nohole version.
For assembly simply put a 2mm rod through the handle and the main part, this rod will act as hinge for the handle.
Remove the small 2mm rod from your old Hasselblad battery-door-screw and you should be able to remove the screw from the battery-door. Then just insert the new screw and put the rod back in place.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hasselblad 500 EL/M Battery Door Lock-Screw with Handle by fluetke is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving fluetke a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure fluetke would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).