Only print files that do not start with "DO_NOT_PRINT".
The STL files are designed for small printers with a 15 cm (6") cube build volume. Note that printing all parts takes a long time, 33 hours on our Lulzbot Mini! We used HIPS for printing.
The following files need to be printed with a brim:
The following files should be printed in high quality:
The following files need to be printed twice:
Use only a small value of in-fill on all six mattress pieces to keep the mattress light.
Beside the 3D printed parts you will need a 2 mm thick plate (acrylic, HIPS, wood ...), assorted screws, paint, glue, fabric, magnets, figure, light buckets, LEDs ...
The holes for the lights are designed for the Axial light bucket set AX80045. Feel free to modify the OpenSCAD source files for other light buckets.
A detailed build log with photos can be found on your blog at http://laneboysrc.blogspot.com/2015/06/bed-mobile.html