Replacement spacer for Ikea Ingolf chair
by jcdoll, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I recently noticed that one of my Ikea Ingolf chairs was missing one of the black plastic spacers from its underside. Without this spacer the chair was not held securely together and wobbled.
It is a simple part so I printed a replacement. In the photos you can see the printed version (yellow) compared with the stock version (black).
Printed in the as-shown orientation with 0.2 mm layer height, 25% infill on a Printrbot LC.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Replacement spacer for Ikea Ingolf chair by jcdoll is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jcdoll a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jcdoll would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).