Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Swirling Water Unit - Vortex water nozzle - Vortex Process Technology (VPT)
by Palmiga, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
DUE TO AN ALLEGED PATENT BREACH THE STL-FILES ARE NO LONGER AVAILABLE, check out http://www.watreco.com/ Please do not contact me trying to get the files. check some alternatives
3D printed nozzle with magnets, creating Vortex water, to restructure the water molecules and thus vitalizing the water? Is it actually working? I don't know but there´s lots of info out there claiming so. I designed this nozzle to raise the awareness for our urgent need for pure water on this planet. If this design works... great fun! If you start thinking about how you can contribute in some way... OUTSTANDING :-)
The information collected here is for educational and entertainment purposes only. It is not
to be considered medical advice, prescriptive or diagnostic. See your physician for
qualified health care. And I do not claim that this design will work in any special way.
I was inspired by the work of many great inventors and researchers like for instance:
Viktor Schauberger https://en.wikipedia.org/wiki/Viktor_Schauberger
Johann Grander https://de.wikipedia.org/wiki/Johann_Grander
Why did it get my attention? Well lots of people claim that the water structure is very important. Like for instance: http://www.fractalfield.com/implodermagneticresearch/LukaszImploderResults.jpg
Also included some interesting youtube videos below.
So I designed this vortex nozzle to be 3D printed... Now anyone can download, 3D print and test if the alleged benefits of "living water" are true or not... (if this design is working that is...)
I´m the first one to admit I do know very little of how everything truly works. Also a true scientist will say that the "truth of today" is merely a matrix of theses hopefully reflecting the truth but they need to be questioned to be able to dig deeper, if that was not the case the development would come to a full stop and everything would be based on assumptions and belief...
ASSUME = "To accept something to be true without question or proof"
Urban version: "Do you know what ASSUME means? It makes an 'ASS' out of 'U' and 'ME'..."
BELIEF = "the feeling of being certain that something exists or is true" or "something that you believe"
Made 1/2 inch + 3/4 inch threaded parts so that you can use most adapters and hose connectors (for instance 1/2"-M22x1 for the tap).
Versions with holes can be used for rods/M6 rods as tripod stands in ponds/barrels etc. Alternatively threaded pipes etc can hold the unit directly.
Use teflon tape (Thread seal tape / PTFE tape / plumber's tape) on the threads...
Also possible to add magnets to test restructuring of the water. Perhaps water "remembers" toxins etc and acts like it still is in the water even if filtered out by carbon filters etc. Imagine what that does to the drinking water that circulates back to the tap from the sewers.
Magnets might restructure (reset) the "water molecule clusters" since the H2O molecule has a negative and a positive side. Lots of people are doing research and it looks like the industry successfully uses water treatment that suggests that it´s a fact...
(I will test these magnets: http://www.magnordic.se/shop/gummi-magneter-17x9-7624p.html )
"Only water that has been exposed to the North pole energy should be used for human or animal consumption."
"When used on plants, the South pole exposed water will stimulate them to develop and grow at an accelerated rate."
"The Russians began using magnetized water in their hospitals many years ago. ...they used bipolar water, water that had been exposed to both the North and South poles of a magnet..."
I print without support and do not care about the fact that the parts are not 100% watertight due to the FDM method.
Consider using a FDA-approved material.
If it´s printed in rubber-like material it will perhaps survive running in the pond over winter?
the longer funnel prefer lower flow since the spin is higher.
Use the files in any way you like :)
If you'd like... Please also check out my unuiqe UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament.
Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Swirling Water Unit - Vortex water nozzle - Vortex Process Technology (VPT) by Palmiga is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Palmiga a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Palmiga would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).