60mm fan cover
by Lithgowlights, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Customized version of http://www.thingiverse.com/thing:735449
The 60mm fans are used a lot to vent enclosures in my Christmas Light display, and last year I caught one cable, so time to cover the fans to stop it happening again. This customised version is 60mm across, 2 mm thick, no fan offset, and weighs less than 3 grams when printed with 20% infill. 5mm holes are centred 5mm from the edge, but most likely I'll cable tie them to the fan below.
Using the following options:
circles = 4
screwsize = 5
screwpos = 5
nradis = 4
percair = .75
inh = 0
screwcoversize = 5
fancoversize = 60
$fn = 128
fancoverheight = 2
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
60mm fan cover by Lithgowlights is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Lithgowlights a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Lithgowlights would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).