Make bubbles in the wind : weathervane
by magic_mushrooms, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Here is a weather vane that uses the wind to blow bubbles .
I modeled more propellers to get into most printers .
All parts are very easy to print and assemble with M4 bolts and a small threaded rod M4 .
For the axis that supports the weathervane , I use a stainless steel tube of 10 mm diameter .
With the two gears , the wheel that makes the bubbles turns 3 times slower than the propeller .
I use epoxy glue to fix the rings together to make the rudder.
You just have to put some special soap in the small bowl.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Make bubbles in the wind : weathervane by magic_mushrooms is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving magic_mushrooms a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure magic_mushrooms would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).