Headphone Stand

by Suraki Jul 4, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Cannot seem to print the r and L frames. I give up.

what print settings did you use just to get an idea, the base seems easier and more efficient to print upside down unless theirs something im not considering

I’m so sorry but i don’t remember my print settings.


I hope that you can help me. I use Anet a6 and i cant print the "arm" but the cura say me that the piece is more biggest that my hot bed.
Im very interested to print you piece, Can you help me to resize the pieze?

Thanks you very much for your atention, greetings.

Hi Suraki,

Oh yes, very interesting. Thanks Suraki, i try it. If this work i comunicate u.


Neat design. I just finished printing it. I'm just finishing up painting and buffing the plastic. I'll post some pics under the "made" section when I'm done. I do wish I had scaled it down a little before I started printing though. To anyone else looking to print, I would suggest a smaller layer height than .25mm.

Can this be printed on the FlashForge Finder?

Yes, but you need to modify the model. Rescale or split the parts.

Yup.:-) Designed for full size headphones.
Slice or resize the modell if you want.

This model is not really suited for 3D-printing. It's huge and has lot of oblique planes that come out jagged when printed with an FDM printer, requiring extra finishing work, that could easily be avoided by changing the design. The base is hollow and requires support structures. The plugs in the arms that go into the base are not level with either of the sides of the arm and thus also require support structures. Making two arms also makes the design complex, as one well structured arm could replace the twin design and nearly half the required printing time and material. The part on which the headphones rest against is not really needed.

I do not recommend printing this model. Go find another one.

Hi kaappi,
Thanks for your opinion and i'm happy if you modify the modell as you like.
Anyway i use it happily as it is.:-)

Comments deleted.

Ohh, i uploaded an older version of base.stl , sorry!
Now i refreshed.

is this craft bot plus if it is can you share your settings

Yes, i made with CB+
Nothing special, i use the newest (1.10 beta) Craftware with medium PLA default settings.
For the neck and the base parts i use support material (auto generated).