Here's a 3D printable Arduino/Gshield Enclosure for Inventables X-Carve. I thickened the walls, added some ribs, and made the arduino mountable via countersunk #4-40 screws (can probably use M3's as well). I also loosen the tolerances so everything should fit right off the printer. Enjoy.
Printed with a .8mm nozzle at .6mm layer height at about 18mm/s in ABS. Took about 1hr 45min.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.