Isthan Key Slink - Key holder
by virustwin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Newer version here http://www.thingiverse.com/thing:930828
I can't take credit for the form factor. Got the idea from the Keyport Keyslide. I liked the idea so i designed a version that can take your keys (up to 3) and i called it the Key Slink. You will have to modify your keys (see picture). Prints without support once oriented correctly.
Cut your keys to 10mm height as in the picture above. Once the case and cover are printed, print the key cap, making 2 extra copies. clip the key into the key cap, ensuring the hole in the key slots around the knob inside the cap (may be a little stiff to get in but that ensures the key doesn't fall out). Once the keys are capped, enter them into the case (there is a stop at the front of the case slots so the keys won't fall out of the front). the back cover will go on very easily so you will need to secure it. If you think you will change the keys in the future, you can use two pieces of thick tape (i used friction tape in the picture above). if you think you want a more 'permanent' solution, you can use epoxy like i did. I can add a keychain loop if you wish so just let me know.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Isthan Key Slink - Key holder by virustwin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving virustwin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure virustwin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).