Inmoov 5 servo finger sensor
by Jhack, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a 5 sensor bracket for the inmoov robot currently for the left hand.
5_servo_base needs to be printed with supports.
print settings are
servo pulley was printed out at 100%
5 each of the following need.
Sensor: Hall Effect ratiometric a1302 sensors
Rare Earth Neodymium Magnet 8mm x 5mm
Spring size is 3/8" x 3/4"
http://thehackettfamily.org/blog/?p=59 for more details.
update : 23/5/13
made changes to the base to let servo wires to run easyer, and uploaded right side (untested).
Update 29/5/13 :
uplaoded circuit diagram.
uploaded a full set of right arm parts thank you emys for highlighting the problem.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Inmoov 5 servo finger sensor by Jhack is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Jhack a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jhack would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).