Loading
jiaqiren

Lulzbot Mini Tool Holder

by jiaqiren Jul 17, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

Can you post the source files, hopefully, Fusion 360, so I can modify this for the mini 2?

Thanks
Monty

Made one of these today with 2.85mm White ABS using my Lulzbot Mini's Quick Print mode. The thing turned up beautifully, thanks very much mate!

Oh one other thing--I think if you could possibly make the top a little thicker, the tools would stand up straight. Thanks again!

This is awesome and I just printed! Any chance you can make a 2nd version, so it can be hung of the left side or back? Thanks in advance!

I'm extremely new to 3D printing, so forgive me if this is a foolish question. Should this be printed standing up as it appears in the model image and when importing int Cura? So far the handful of items I've printed all lay flat on the build platform. Wanted to check first, since it's a 4 hour print. You insights are appreciated.

I'm extremely new to 3D printing, so forgive me if this is a foolish question. Should this be printed standing up as it appears in the model image and when importing int Cura? So far the handful of items I've printed all lay flat on the build platform. Wanted to check first, since it's a 4 hour print. You insights are appreciated.

I would definitely recommend laying it on its back to print. Also, you can print this in high speed with HIPS and it will print just fine.

Hi there,

In Cura, you can rotate the model and lay the top flat surface on the print bed, which I believe will shorten you print time a lot.
Feel free to let know if you have further question.

Best,
Jiaqi

Thanks for the advice, sir.

Just got my mini, this is just what I needed, thanx