Volume: no slices
by dennedesigns, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This model shows the volume below the surface z=sin(x)cos(y), above the xy-plane and inside the rectangle [0,pi/2]x[0,pi/2].
This model pairs nicely with two other models Volume: slices x constant and Volume: slices y constant as an illustration of Fubini's Theorem and iterated integration. See http://www.thingiverse.com/thing:928461 and http://www.thingiverse.com/thing:928463.
This model was designed and printed by my WLU summer research student Ryan McDonnell ('17).
This object was made on a MakerBot2X. We used the following settings:
0.20mm layer height
10% infill (hexagonal pattern)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Volume: no slices by dennedesigns is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dennedesigns a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dennedesigns would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).