This is an alternative to the Leatherman Tread
I designed this with easy printing in mind. All the links can be printed with no overhang. If the buckle proves to be too difficult to print, you can add extra links so that the bracelet can slide over your wrist
First, print a link to check the scaling and ensure the hex bits fir snug, if not, it would be better to print one instead of a plate full.
Rescale as nessecary
Print ~20 links, and both parts of the buckle if desired.
I used M3 machine screws with a threaded shaft 14mm long. Anything longer can be trimmed down if desired.
A nut can be placed on the other side if desired, you will just need to use longer machine screws/bolts