Mount for HC SR04 ultrasonic sensor
by Sav54, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Edit 1/10/2015 : Expanded holes
Edit 24/09/2015 : Design error repaired
Edit 24/09/2015 : Stop ! Don't print this thing now . I made a mistake on the diameter of the holes . The corrected file is coming soon .
A simple HC SR04 sensor mount for open source robot . The holes are used to easily secure the sensor with a plastic cable tie ( Colson, Tyrap , Rilsan ... )
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mount for HC SR04 ultrasonic sensor by Sav54 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Sav54 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Sav54 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).