by scorch, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Wakeboard fin that fits my old CWB Sol. I wanted fins that were smaller than the stock fins so I made a new fin model in Alibre Design.
The bottom surface of the fin has an arc to match the board. I printed the fins with a raft that breaks off after printing. The alignment pins are a separate parts that are printed laying down so that they are stronger in shear. The pins are press fit into the fin after printing. There is a hole for the mounting screw but the hole needs to be tapped (1/4-20 thread) after printing.
I included the Alibre Design files for anyone that has access to that program.
I also made 3D printed thumbscrews because I was afraid I might loose my stock thumbscrew if one of the 3D printed fins break. I made my fins out of PLA (100% fill) and they are holding up so far.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Wakeboard Fin by scorch is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving scorch a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure scorch would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).