by dennedesigns, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This model shows the volume of intersection between the sphere x^2+y^2+z^2=2 and z=x^2+y^2. One .stl file has the equations imprinted on the surface, the other does not.
This file was designed and printed by my WLU summer research student Ryan McDonell ('17).
Printed on a MakerBot 2X printer with the following settings: 2 shells,
0.20mm layer height, 10% infill (hexagonal pattern), color matched supports, raft on.
The object was printed sideways with the equations upper-most. We ended up tilting the object by 18 degrees down from the edge between the paraboloid and the sphere, so that the object would have some supports. (We were worried it would fall over.) We've included the .thing file for this print.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Paraboloid-Sphere Intersection by dennedesigns is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dennedesigns a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dennedesigns would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).