FABtotum filament spool
by atleberg, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Filament spool that fits inside the FABtotum fabricator.
v003: Be aware that this model is the exact thickness of the available space inside the FABtotum (with the side panel closed). It works fine on my printer, but might create more than friction than necessary.
v004: Is 2mm thinner than v003 and has a center hub with a 8mm hole to make the process of adding the filament easier.
Print the piece twice, then glue together. I used a 3Doodler to do this, but a regular glue gun should do nicely as well.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
FABtotum filament spool by atleberg is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving atleberg a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure atleberg would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).