Rubber bands sentry gun
by tristomietitoredeituit, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Full-auto sentry gun, shoots rubber bands.
For the software, follow the guide: http://projectsentrygun.rudolphlabs.com
!!! for the barrel, set the scale dimensions on X 35.12mm and Y34.97mm
-3 M5 50mm screws
-2 M4 30mm screws
-1 M4 40mm screw
-12 M3 16mm imbus
-3 M3 10mm
-15 M3 nuts
-3 M5 nuts
-6 M4 nuts
-3 M6 nuts
-10 servo screws
-1 M6 80mm threaded bar
-1 skateboard ball bearing
-1 30 cm piece of string
-2 135 mm x 8mm ⌀ metal pipe
-1 35 mm x 8mm ⌀ metal pipe
-1 180° micro servo https://goo.gl/GRKsp6
-1 180° servo https://goo.gl/5jcvtU
-1 360° servo https://goo.gl/zJERWf
-1 arduino UNO, 2009 or Mega https://goo.gl/x48Jxj
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rubber bands sentry gun by tristomietitoredeituit is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving tristomietitoredeituit a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tristomietitoredeituit would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).