The Kings Armory 3D Printed Tower
by Northernmenace, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Made for a friend, replacement towers for the game The Kings Armory by Gate Keeper Games.
Two models attached, advanced has the little arch thingies on it and a different internal structure, The simple doesnt have the arches and has a simplified internal structure to reduce print time. The little arches are not really needed as they are hardly seen at the angle the game would have the towers at (on a table, looking down at them).
Sadly they do not fold, nor do they fit in the box! Give it a coat of white spray paint and then a thin watery black wash (mix black water paint and water) and you will end up with a simple stone look that works well.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
The Kings Armory 3D Printed Tower by Northernmenace is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Northernmenace a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Northernmenace would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).