Bukobot dump bin
by fjohn624, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a dump bin and silicon wiper that I added to my custom Bukobot printer. The bin is made to use with 1 or 2 Spitfire extruders.
In order to use this you will need to extend your X axis extrusions and bearing rails. My printer is a V1 with a V2 x carriage and dual spitfire upgrade. I had to buy rails from misumi that were 90mm longer than the originals as I wanted to upgrade to two extruders and the new carriage at the same time.
and two: PSFJ8-465 (Bearing Steel with Chrome Plating, HV750 or ~HRC62)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bukobot dump bin by fjohn624 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving fjohn624 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure fjohn624 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).