Loading
KKG

The M200 Sniper Rifle

by KKG Aug 10, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

the sniper bullet cartridge is missing :( Can you load that file?

go to the remix one https://www.thingiverse.com/thing:2574169

the mag is on there

M200 Sniper Rifle

No magazine on this file?

go to the remix one https://www.thingiverse.com/thing:2574169

the mag is on there

M200 Sniper Rifle

A sketch with the items and how they are put together would be nice.

And a scaled version to 50%.

Is this the problem with the scope fixed?

trying to print the optical sight but some of the walls are too thin. can't even print correctly with .1mm nozzle. has anyone found this same issue?

Nope And I scaled to half original size! Just print with slower speed and 100% infill!!!!!!

But how you scaled the object : BarrelShellB to 50%? in S3D or Cura it will not correctly scaled down.

Worked fine in repetier host!

Is there someone that can slice the big parts in half so they can be printed flat side down ? for example the optical shight would be printed better in 2 halves otherwise it would need a tone of support material without reason
Thanks in advance

finally i good model of the Intervention xD

bonjour, est ce que vous avez fini de tout assemblez si oui, est ce que vous pouvez m'envoyer des photos, parce que je suis en train d'imprimer les 22 pièces. j'ai l'impression qu'il y a des pièces qui serve pas au montage. voici mon adresse mail. paglianorufo61@hotmail.fr . je vous remercie infiniment

bonjour est ce que vous l'avez imprimé, est ce que le sniper est bien complet.

would like to know how i could break this down so i can print it out of my dremel?

What is the best way to print the Optical Sight?
For the best result. I got a Ultimaker 2!

Do you have the magazine and bullet files?

I re scaled and resized a sniper rifle magazine from another design, for this sniper rifle. It can be found here on Tinkercad:
https://www.tinkercad.com/things/hilEH9Le5yA-m200-sniper-rifle-magazine

Does it Fit this design

yeah it should, and if it doesn't then u could just sand it and it'll fit

And i just notice that is one piece missing , the magazine for the "bullets".

Hi , just starting printing your M200 , but can you tell me if there is any moving part ? Because the
Optical Sight has lots of gaps like it was intended to move.
Thank you

What program did you design it with?

Non-operative???? But you have the most oper8r gloves ever pictured next to it

Nice job. I loved this thing until everyone who played CoD knew what it was. Hopefully one day I'll have one.

Hi, there very nice model, can i ask you how did you glue them together as you said you printed in PLA?

Thanks

There are pieces missing from this model

yes there seems to be parts missing, anyone have these, and the grip is a mismatch fit.

Do you have the file for the magazine? Im making one and id really like to have it complete. thanks!

what bed size does this need

I was searching the printer you use, is it xt or xt plus? difference?
http://www.mankati.com/3d-printer/fullscale_XT_Plus.html?

I used a Plus, Mankati Fullscale XT Plus to be accurate...But I've never bought an XT, so not sure about the difference.
My printer works well, it has a big print size so I do not need to break the model into a lot of little pieces. Convenient.

Well what bed size is yours? Mine is 262630cm and it can pull off these parts.

Damn...that's a gorgeous model, but now I've gotta break it down even further for my print bed size :(