Arduino UNO hard case V1
by SteveMac, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I wanted a heavy duty case to enclose a UNO and some extra electronics so I made one.
I will make a better one, but this is version 1.
It has M4 nuts set into the base for M4 socket head screw recessed into the lid. It has alignment ribs between base and lid.
The UNO sits on studs and I weld it down with some filament.
There is space above the UNO for the current job, and a hole grid on the lid for adding connectors and such.
Version 2 will have thinner walls, and more interlocking between the base and lid, but this one will do for the moment.
Just print them.
Heat M4 nuts and pull them into the base.
I use a soldering iron to add a couple of dabs of filament to hold the PCB down on the mounting posts.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Arduino UNO hard case V1 by SteveMac is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SteveMac a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SteveMac would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).